/POWER offers a wide range of made in Italy products: neon transformers, LED drivers, overvoltage protectors, components and devices for sanitizing air and water with ozone / cold plasma / uv-c, as well as electrical and electronic costomized products.
F/ART Neon Transformers
Transformers for cold cathode (neon lamps), designed and produced by F/ART in Italy
Input: 120-240 V, 50/60 Hz
Output: 990 V - 15,000 V
Current Intensity: 18-200 mA
Electronic Transformer ECR
Input: 220-240 V, 50-60 Hz
Output: 2.000 / 5.000 / 6.000 / 9.000 / 10.000 V
Current Intensity: 20 / 30 / 50 mA
Miniblock
Input: 120-240 V, 50/60 Hz
Output: 1.000-6.000Vac
Current Intensity: 18-120mA
Resinblock Pe
Input: 120-240 V, 50/60 Hz
Output: 1.000-10.000Vac
current Output: 18-200mA
Resinblock Millennium
Input: 120-240 V, 50/60 Hz
Output: 2.500-10.000Vac
Current Intensity: 18-120mA
Resinblock Coldline
Input: 120-240 V, 50/60 Hz
Output: 1.750/3.500/5.000Vac
Current Intensity: 150mA
Resinblock CM
Input: 120-240 V, 50/60 Hz
Output: 1.000-15.000Vac
Current Intensity: 18-120mA
Resinblock Low Voltage
Input: 120-240 V, 50/60 Hz
Output: 990Vac (x1 o x2)
Current Intensity: 50-120mA
*Warning: From 01.01.2019, the European RoHS Directive does not allow for the production and use of cold-cathode and/or fluorescent lamps with a power supply of less than 1,000V, if they contain mercury.
Protec (PI)
TotalPro
External Protec (PPE)
Power Factor Capacitors
These are necessary for anti-explosion type power factor correction.
It is recommended to always rephase the power supply line, allowing for a more economical and efficient use of energy, with the possibility to completely eliminate reactive energy costs. This allows the transformer, the sign and also the network cables to work better thanks to the fact that less current is absorbed.
Mounting Braket and Lifting Jacks
These accessories allow the transformers to be correctly anchored and fixed in place.
Lids
Bridge Connectors
Specific connectors for Resinblock Transformers to use without the internal protection PI and TP.
Measurements tools
Milliamp clamp meter: Using a milliamp clamp meter allows you to choose the most suitable transformer for your cold-cathode lamp, thereby guaranteeing that it lasts longer and works more efficiently.
This is an essential tool for anyone working with neon as it can be used to measure the load current without disconnecting the high-voltage wires. The special tips can also be used to measure the AC input voltage, as with a normal multimeter (tester), and the AC input current without disconnecting the network.
Neon Case
Electrodes
Electrode covers
Resale of electrode covers. These are useful for the electrical insulation of the electrode as well as acting as an aesthetic cover and protection against drops of water. They are made from silicone and come in a number of sizes and colours.
Electrode covers are compulsory pursuant to the European EN 50107-1 standard.
High voltage cables
Silicone cables specifically for high voltage connections, pursuant to standard EN-50143.
High Voltage Labels
LED DRIVER F/ART
Made in Italy, costant voltage LED drivers in resin suitable for signs, interior design, lighting, greenhouses where there is a high percentage of humidity and poultry plants where there are ammonia vapors.
• Made in Italy design and production
• The resin encapsulates the product and protects it, dissipating heat better than other materials (patent pending)
• Built-in surge protection (1kV)
• SELV
• No flickering
• Low output ripple
• Dimmable with external dimmer
VIRGO - LED Power Supply
Resin power supplies for LED made in Italy, elongated and perfect to be inserted into narrow profiles thanks to their thin and slender mechanics.
Input: 220-240V, 50/60Hz and 120-240V, 50/60Hz for 100W models
Output Voltage: 12/24/48V
Power: 35/62/100/150W
IP index: IP68 (outdoor)
SAGIT - LED Driver
Resin LED Driver made in Italy suitable for strips, LED modules for signs and lighting.
Input: 120-240V 50/60Hz
Output Voltage: 12/24/48V
Output Power: 60/80/100/150/200W
Indice di Protezione: IP68 (outdoor)
LIBRA
Input: 220-240V 50/60 Hz
Power: 30, 60, 75, 100, 150 W
Output Voltage: 12V, 24V
Indice di protezione: IP20 (indoor)
SCORPIO
Surge protectors, also known as "SPDs" (Surge Protection Devices) absorbes the voltage variation in place of the installed equipment, thus also drastically reducing the risk of breaking of electrical appliances.
Scorpio is a SPD, available as differential or common mode, specific for low voltage and protects against the direct and indirect effects of lightning or other transient overvoltages of a differential type (line - neutral). It must be installed upstream of the electrical or electronic devices.
Available models: 4kV / 6kV / 10kV DIN / 10kV BOX
Frequency: 50/60 Hz
Type: T3 (protect a single device) or T2 (protect multiple devices
Leading Edge Dimmer
Air Purifiers
F/ARYA is a range of devices for sanitising indoor air and surfaces in home and work environments.
Portable sanitisers are designed to treat small commercial or home spaces. The size and weight allow the device to be easily moved from one room to another and no specialised operator is required.
SANITIFICATION TECHNOLOGIES: Ozone / Cold Plasma / UV-c
Transformers for Cold Plasma
Input: 220-240 V, 50 Hz
Output: 3,000 / 3,500 / 3,800 V
Electrical current: 10 mA
These high-voltage output transformers, sized to power cold plasma generators for the purification of enclosed spaces, are designed to maximize the production of ions without creating ozone molecules.
They're unique because of the use of our special epoxy resin for advanced heat dissipation, a guarantee of strength and durability (patent pending).
F/ART also produces custom made cold plasma transformers with specifications on request.
Electronic transformers for ozone generators
Input: 12 / 120 / 220-240 V, 50-60 Hz
Output: 3.000 / 6.000 V
Current intensity: 70 / 80 / 100 mA
O3R are high voltage output transformers, specific for ozonizers, allow to obtain a constant and generous production of electric discharges with consequent generation of ozone.
Tube plasma generator
Stainless steel mesh tube separated by a borosilicate glass tube that acts as a dielectric. It's specific for cold plasma (NTP).
Tube ozone generator
Kit Plasma
Easy-to-assemble kit for sanitation with NTP (cold plasma) technology.
The support houses the tube in the centre of a duct, offering perfect electrical insulation from the equipment in which it is mounted.
The cold plasma kit is available in different sizes and customizable. It includes:
Cold plasma transformers is not included in the kit.
Ozone Kit
Easy-to-assemble kit for sanitation with ozone and plasma.
The casing houses the tube in the centre of a 12-cm-diameter duct, offering perfect electrical insulation from the equipment in which it is mounted. The duct, supports and clamps are made of materials that are highly compatible with ozone.
The kit is available in different sizes and customizable. It includes: